Mercury 2 HP / 3.5 HP Outboard Motor Stabilizer - No Drilling Required

New Improved Model
With improved size and bending angle, top speed has slightly increased compared to previous stabilizers, depending on wind and current conditions.
When the throttle is fully open, adjust the tilt so that the outboard motor is tilted about 2-3° backward from vertical to the water surface.

Compatible with MFS2A-C, MFS3.5A-C, M2B, M2.5A2, M3.5A2, B2, 2M, 3.3M, 2MF.
Can be installed without modifying the outboard motor body.

Even if the stabilizer comes into contact with something, its strength has been increased, making it less likely to bend.

If the stabilizer is too large, it creates resistance and causes stalling; if it's too small, its effect is diminished.
This stabilizer has been tested extensively and manufactured to an optimal size.

[Effects of the Stabilizer]
Planing is a state of navigation where a much larger lift force than buoyancy acts to support an object.
The hull is lifted by the lift force acting on the bottom of the boat, and when in a planing state, the bow lowers, and the characteristic is to glide over the water surface with a trim angle (longitudinal tilt) of 3° to 5° relative to the water.
Therefore, lift is always generated on the underside of the stabilizer at a trim angle of 3° to 5°.
This lifts the outboard motor and brings it into a planing state more quickly.

This product is designed with a unique bending process to ensure water flow and prevent the planing effect from decreasing.
Please experience the effect of this stabilizer for yourself.
It also improves fuel efficiency.

Material: SUS304 (Stainless Steel) 2B material, 2.0mm thick.
Laser cut and bent.

Resistant to saltwater corrosion (rust) and excellent strength due to the bending process.

Install by sandwiching it on top of the anode metal and tightening with the existing bolts on the main unit (25mm pitch).
Attach the included reinforcement plate. Left and right reinforcement plates and mounting bolts are included (stainless steel).

This is our original product.

Note) Scratches, oil, burn marks, dross adhesion, burrs, etc., may be present from the manufacturing process.

Please judge from the images.

★Important Notes★
Please refrain from purchasing if you are sensitive or concerned about minor details.

No warranty is provided.

We strive for same-day service, but due to work circumstances, immediate response for communication and shipping may not be possible.

We will not be held responsible in any way after purchase, regardless of the circumstances.

We await your purchase only if you understand the above points.