Spray Booth, Spray Work, DIY Painting Booth with LED Light, Plastic Models

This is a paint booth purchased from Amazon.
The items included are shown in the third photo (rotating table is missing).
It has been used a few times for hobbies. Operation has been confirmed.
It will be shipped with tape and shipping labels directly attached to the outer box.

The following is quoted from the Amazon product page.

➤【For Plastic Models and Hobby Painting】This is a paint booth that absorbs excess paint particles that become airborne during airbrushing or spray painting of plastic models and hobbies. Some paints are highly toxic, so ventilation alone may not be sufficient, but using a booth can alleviate concerns. Our booth is equipped with a 25W fan motor and exhaust duct, which sucks in airborne paint and expels it through a window, preventing re-adhesion of paint particles. It is recommended for hobby and model enthusiasts.
➤【Flat Exhaust Duct & Over 40cm Width】The exhaust duct is flexible and stretchable, extending up to approximately 1.7m, allowing for setup even if your work desk is a bit far from a window. The flat type is easy to install in a window and prevents expelled paint from returning. Our paint booth has a width of 42cm. Since the average adult male shoulder width is about 40cm, it makes painting larger parts easier.
➤【With Light & Easy to Carry】Equipped with LED lights, it illuminates your work area, making it easier to see small details and improving work efficiency and finish, especially in low-light conditions or at night. The power switch for the light also prevents forgetting to turn off the power. You can paint with peace of mind even in dark indoor environments. The main unit weighs about 3.5kg and is foldable, allowing for neat and compact storage when not in use. It also has a grip for convenient portability.
➤【Accessories and Specifications】Booth Body *1, Exhaust Hose *1, Exhaust Port Attachment *1, Hose Clamp *1, Hose Joint *1, Hose Sleeve (with 4 screws) * Power: AC100-240V 50/60Hz Motor: DC12V LED Power Consumption: 12W LED Brightness: 1200lm Airflow: Approx. 4m³/min Noise Level: Approx. 47db Motor: DC Motor Main Unit Size (Stored): Approx. W420 x D150 x H250 (mm) Main Unit Size (In Use): Approx. W420 x D485 x H330 (mm) Main Unit Weight: Approx. 3.5kg